DT HIGH SPEED GEARLESS TURBO BLOWER
CORE TECHNOLOGY


Lone-Star-High-Speed-Gearless-Turbo-Blower-Core-Elements
Lone Star High Speed Gearless Turbo Blower Core Elements

CORE ELEMENT

Integrated Motor and Compressor. Hover over the identifier for the blower part component.


Air Foil Bearing Like No Other

Requires no oil or grease—ever!
Air foil technology has evolved substantially since the 1960s to become industry standard for military and commercial aviation. Simple and reliable these bearings are mechanical and do not require complicated control systems or external power to operate.

Lone Star High Speed Gearless Turbo Blower Core Tech Air Foil Bearings
  • Nano Silver Triple Treatment Bearing (NSTB)+
  • Requires no oil or grease—ever!
  • Improvement of Abrasion, Elasticity, & Durability
  • Optional 50,000 Start Stop Warranty or 10 Years
  • Best in the Industry

Motor Design

Lone Star High Speed Gearless Turbo Blower Core Tech Motor Design
  • Patented Design
  • Dissipates the heat generated by the motor
  • Heated air is discharged and NOT ingested
  • Results in longer life of the motor and operates the turbo package more efficiently!
  • Self Cooling – No external fans or liquid cooling is needed

PERMANENT MAGNET SYNCHRONOUS MOTOR (PMSM)

Does not loose efficiency at reduced loads like induction type motors

Lone-Star-High-Speed-Gearless-Turbo-Blower-Permanent-Magnet-Synchronous-Motor-PMSM

IMPELLER DESIGN

Ensure a high strength-to-weight ratio for high speed operation
Using todays most advanced Computational Fluid Dynamic (CFD) and Finite Element Analysis (FEA) Software and modern 5 axis machine we are able to create impellers from design to fabrication without compromise to efficiency while ensuring a high strength to weight ratio for high speed operation. Backward swept profile keeps a high rise to surge through the entire range.

Lone-Star-High-Speed-Gearless-Turbo-Blower-Impeller-Design
  • Patented Design
  • 5 axis Machined from the Forged Aluminum and anodized
  • Tolerance remains under 1/1000 mm for all models
  • Clean and smooth Surface. More efficient and strength compared to casted impellers
  • Can be used under high pressure with good strength
  • Designed for optimized speed at the highest efficiency point
  • Impeller and Shaft are directly connected. Power transmission loss is 0%
  • A range of raw materials can be used

GC GEARED COMPRESSOR
Air, Gas, Pressure
Power: 200 hp – 13,000 hp
140 kW – 10,000 kW
Flow: 1,250 cfm – 350,000 SCFM
2,100 m3/h – 600,000 m3/hr
Pressure: 30 – 1,100 PSI
2 bar – 80 bar
API 614/617/672

GB SINGLE STAGE GEARED
Air, Gas, Pressure, Vacuum
Power: 100 – 6,000 HP
75 – 4,500 kW
Flow: 1,000 – 88,000 SCFM
1,700 – 150,000 nm3/h
Pressure: 2 – 35 PSI
0.1 – 2.4 bar
API 617/672

MC MULTISTAGE BLOWER
Air, Gas, Pressure, Vacuum
Power: 20 – 3,500 HP
15 – 2,500 kW
Flow: 300 to 45,000 SCFM
500 to 75,000 nm3/h
Pressure: 2 – 25 PSI
0.1 – 1.7 bar

DT HIGH SPEED TURBO
Air, Pressure
Power: 20 – 500 HP
15 – 375 kW
Flow: 150 – 15,000 SCFM
250 – 25,000 nm3/h
Pressure: 2 – 20 PSI
0.1 – 1.4 bar

We Rent The Equipment You Need
Centrifugal Compressor
PD Blower
Multistage Turbo
High-Speed Gearless Turbo
Single Stage Geared Turbo
Complete Packages
Direct Replacement Drop-In
Starters and Control Panels
Accessories

CONTROL SYSTEMS
sLOC™ Local Control Panels for Blowers and Compressors
sMAC™ Process and Sequencing
Master Control